manufacturing

sadip location

quality system

push on pipes

locked push on pipes

flange pipes

flange details

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

THE MAXIMUM PRESSURES
  • The maximum pressures for SADIP pipeline components are indicated in the table.

Maximum allowable pressure Excluding pressure surges

maximum operating pressure including pressures surges

maximum site test pressure

values given in the table

values given in the table+20%

values given in the table+50%

Nominal Diameter DN (mm)

Maximum Working Pressure (Bars)

Standard Joints Push-on

Locked Joints Push-on
pipe (K9) Standard

Fittings

 pipe (K9) Standard

Fittings
1 2 1 2
80 64 64 40 64 64 40
100 64 64 40 64 64 40
150 55 57 40 55 57 40
200 44 50 40 44 50 40
250 39 46 40 39 44 40
300 37 43 40 37 41 40
350 35 41 25 30 30 25
400 34 40 25 30 30 25
500 32 40 25 30 30 25
600 31 40 25 27 27 25

  • Collars, Bends & Reducers

  • Flange/Socket, Flange/Spigot, Tees & Blank Flanges

All pipes at factory are subject to hydrostatic test pressure as follows:

  • DN 100 -300   -----> 60 bars (while ISO 2531 requires 50 bars).

  • DN 350 - 600  -----> 50 bars (while ISO 2531 requires 40 bars).

SADIP  ductile iron pipes and fittings have safety margin above the maximum allowable pressure mentioned in the above table.

K9 PIPES               

K12&K14 FITTINGS