manufacturing
	sadip location
	quality system

	specification
	push on pipes
	locked push on pipes
	flange pipes
	flange details
	standards

PIPES JOINT

• The standard joints for the pipes are designed so that contact pressure between the gasket and the metal increases, thus a perfect seal is guaranteed.

PIPES DEFLECTION

SADIP SOCKET - spigot joints permits angular deflection which gives the following  advantages:

• Accommodation of ground movements as shown in the diagrams below.

• allowing adjustment while installation.

• reducing the number of bends required.

PERMISSIBLE DEFLECTION OF EACH JOINT (in degrees)